Masonry Tuckpointing Contractors in West End

Request a Free Estimate
Receive
$500 OFF Your New Project!
* Expires on January 31, 01

Bring In The Most Excellent Tuckpointing Contractors in West End

Tuckpointing is the process of repairing the mortar between the bricks in a wall. It is a necessary maintenance task that should be performed every few years to keep your home looking its best. Tuckpointing can also help to prevent water damage and protect your home from freezing weather.

If you’re in need of a professional tuckpointing contractor, look no further than the experienced team at Paragon Remodeling. We have years of experience in this field and can provide you with high-quality service. We’re always up for a challenge, so no matter how big or small your project may be, we’ll be able to handle it with ease. Contact us today and get a free estimate!

How Our West End Contractors Handle Tuckpointing

Step 1. Remove mortar joints. 

The first step in tuckpointing is to remove the old mortar. We usually use an angle grinder, as it is less time-consuming than using a hammer and chisel.

Step 2.  Remove dust and debris. 

Using a masonry brush, we remove the dust and debris from the ground-out mortar joints. If the dust is too thick, we use a high-pressure air nozzle to do the job.

Step 3. Mix new mortar. 

Once the ground-out mortar joints are already clean, we mix the new mortar to make sure it matches the existing color of the brick.

Step 4. Fill the joints.

Once the mortar is ready, we begin to fill the joints with the new mortar. In doing this, we start with the horizontal joints first.

Step 5. Smoothen. 

After applying the mortar to the joints, we smooth it to achieve a flat-looking surface. Depending on your request, we may also give it a slightly indented look.

Step 6. Make straight lines. 

When the new mortar starts to harden, we use a straightedge and a tuckpointing tool to make straight lines in the center of the joints. To make it look neat, we make sure that the lines we produce are as straight as possible.


Top Customer Reviews on Our Tuckpointing Contractors in West End

“Paragon’s premier agent was super knowledgeable about the DC metro area and helped me hone in on my dream home in no time. I’ve already referred them to 3 of my colleagues with great feedback.”

Stacey W.

“While I was looking for tuckpointing contractors online, I came across Paragon Remodeling. Our old house in Washington needed some work to be done and I contacted them immediately. To my surprise, they were very responsive and were able to start working right away. Their contractors were able to finish my tuckpointing job request just in time for my dad’s birthday. Thanks, Paragon Remodeling!.”

Loretta T.

Tuckpointing Contractors in West End FAQs (Click to Expand)

Tuckpointing costs anywhere from $5 to $25 per square foot. However, keep in mind that the final price will depend on the condition of your masonry and the specific needs of your project. For example, if your masonry has severely deteriorated, it will likely require more labor and material, which will drive up the total cost.

Tuckpointing is an extremely specialized craft that requires a great deal of training and experience to perform correctly. The high cost of tuckpointing reflects the time and effort required to produce a quality finished product.

Yes, tuckpointing masonry does work. In fact, it's one of the most important steps in preserving masonry structures. Tuckpointing helps to seal the joints between bricks and mortar, and also helps to fill in any cracks or voids in the mortar. This not only improves the appearance of the masonry, but it also helps to protect it from weathering and water damage.

Mortar joints should be ground out to a minimum depth of 3/4 inch to remove all old mortar and buildup. This will give you a clean surface to work with and help the new mortar bond properly. Failure to do this may result in loose or missing bricks, or a weak joint that is susceptible to water infiltration.